3
CODE SWITCH SETTINGS
All transmitters and receivers will be shipped from the factory with preprogrammed 4 digit system codes. This
ensures that your neighbor will not duplicate the same system code as your units. Your transmitter and receiver
system codes should already match, so you do not need to program any codes. If a new secure system code is
needed for your installation please call 785
-
623
-
1500 to be issued a secure system code for your area that the
system will be operating in.
If you ever need to replace a unit due to servicing, the field code can be programmed to match the existing or
new add on units. FOLLOW THE EXAMPLE BELOW
…
FOR CODE QUESTIONS? CALL 785
-
623
-
1500
8
9
7
EXAMPLE: CODE
6789
KEY
7
8
9
0
5
6
3
4
6
O
FF
O
N
Use the # KEY to the left
to make each digit of the
code. It takes three of the
switches to make one num-
ber of the code.
Use switches 1,2,3 for the
first # in the code. Switches
4,5,6 for the second #.
Switches 7,8,9 for the third
#. Switches 10,11,12 for the
fourth #.
Code Switches
INDICATOR LEDS
POWER
Indicates that the Transmitter has power and is
ready to operate.
TRANSMITTING
Indicates when the Transmitter is transmitting.
SENSOR LEDS
When these LED
’
s are on it indicates that the terminal below it is connected to the COMMON terminal.
SENSOR LEDS
TRANSMITTER FUNCTION SWITCH SETTINGS
SWITCH#
4
ON
MAKES TRANSMITTER A UNIT #2 TRANSMITTER
4&5 both
ON
MAKES TRANSMITTER A UNIT #3 TRANSMITTER
5
ON
MAKES TRANSMITTER A UNIT #4 TRANSMITTER
5&6 both
ON
MAKES TRANSMITTER A UNIT #5 TRANSMITTER
6
ON
MAKES TRANSMITTER A UNIT #6 TRANSMITTER
(see more about this feature on page 12)
8
ON
ACTIVATES THE TEST BEACON (Used for testing and range finding only. When activated the transmitter will
send a code every 10sec cycling the receivers relay.
To activate this feature put a jumper wire from the ON
-
OFF INPUT to
COMMON on the relay input you want to test. DO NOT have the receiver wired to the pump during this test. This func-
tion must be turned off for normal operation. (More details on page 4)
OFF
NORMAL OPERATION MODE
9
ON
REFRESH (This function will retransmit the state of the Sensor Inputs once every 45 minutes.)
OFF
NO REFRESH (Transmits the code only when there is a change of state on the Sensor Inputs.)
To watch a
“
How To
”
video on this feature click on the link below:
