EN
Master Language is English
Hot Runner System Installation Guide
SVC-17-0001_EN-Rev13
RESTRICTED: Property of Synventive.
- 363 -
All rights reserved. Errors and omissions excepted
For limited third party distribution based on need and intended use.
© 2021 Synventive Molding Solutions
H O T R U N N E R T E C H N O L O G Y
Hot Runner System Installation Guide
Service and Maintenance / Disassembly / Assembly Tools
10.1.5 Disassembly / Assembly Tools
In this section the Stripping and Mounting Tool parts are identified with the numbers indicated in the following figure.
10.1.5.1 Nozzle Heater Disassembly Tool AT-FHA-032 for the Heater Type FHA#-032-###-##
The dismantling tool is required to pull the front heater from the nozzle body or the sprue bushing.
The adapter AT-FHA-032-C-05 is only required for the sprue bushing.
AT-FHA-032
Pos. Qty. Part No.
Description
T4.1
1
AT-FHA-032-C-01
Disassembly Tool Socket
T4.2
1
AT-FHA-032-C-02
Disassembly Tool Sleeve
T4.3
1
AT-FHA-032-C-05
Disassembly Tool IB24 Adapter
Nut
T4.4
1
GN817-4-4-CK
Indexing plunger; Pin Bore=4;
l1=4
T4.5
2
DIN913-M6x12-45H Flat Point Socket Set Screw 45H
Alloy Steel
T4.6
1
ISO4017-
M12X100-12.9
Full Thread Hexagon Screw
ISO4017
10.1.5.2 Nozzle Heater Disassembly Tool AT-FHA-041 for the Heater Type FHA#-041-###-##
The dismantling tool is required to pull the front heater from the nozzle body.
AT-FHA-041
Pos. Qty. Part No.
Description
T4.1
1
AT-FHA-041-C-01
Disassembly Tool Socket
T4.2
1
AT-FHA-041-C-02
Disassembly Tool Sleeve
T4.3
-
-
-
T4.4
1
GN817-4-4-CK
Indexing plunger; Pin Bore=4;
l1=4
T4.5
2
DIN913-M6x12-45H Flat Point Socket Set Screw 45H
Alloy Steel
T4.6
1
ISO4017-
M12X100-12.9
Full Thread Hexagon Screw
ISO4017
Doc008132.png
Doc008839_RIS.png
