EN
Master Language is English
Hot Runner System Installation Guide
SVC-17-0001_EN-Rev13
RESTRICTED: Property of Synventive.
- 373 -
All rights reserved. Errors and omissions excepted
For limited third party distribution based on need and intended use.
© 2021 Synventive Molding Solutions
H O T R U N N E R T E C H N O L O G Y
Hot Runner System Installation Guide
Service and Maintenance / Disassembling the Nozzle Tip and Nozzle Body
10.3 Assembly the Nozzles 16E-06 / 22E-06 Series
In this section the nozzle parts are identified with the numbers indicated in the following figure.
NOTICE
Always tighten the screws to the torque specified in the respective table in section 13.
Doc008837_RIS.png
Pos. Description
1
Nozzle body
2
Head ring
3
Head heater (optional)
4
Retaining ring
5
Front heater
6
Retaining ring
7
Cover tube
8
Tip
9
Wear insert (optional)
10
Cooling bushing (optional)
11
Pre-centering ring (optional)
