11
PROBLEMS WITH YOUR WINE CABINET?
If you have a problem with your Wine Cabinet please consult the troubleshooting guide below for a possible solution to
the problem before you call a Service Engineer.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Wine Cabinet does not operate.
Appliance not plugged in or power not switched on.
The appliance is turned off.
The circuit breaker has tripped or a fuse has blown.
Wine Cabinet is not cold enough.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.
The room temperature is hotter than normal.
A large number of bottles have been added to the
Wine Cabinet.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work.
Appliance not plugged in or power not switched on.
The appliance is turned off.
The light has failed.
The light button is “OFF”.
Vibrations.
Check to assure that the Wine Cabinet is level.
The Wine Cabinet seems to make too much
noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant in your Wine
Cabinet.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The Wine Cabinet is not level.
The door will not close properly.
The Wine Cabinet
is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
