Hoshizaki ROX-20TA-U, Инструкция по эксплуатации

Страница: 45 / 51

41
7. PREPARING WATER ELECTROLYZER FOR LONG STORAGE
CAUTION
Remove water from the unit if the unit is not used for more than a week. Foul water
may damage the unit.
IMPORTANT
Before operating the water electrolyzer next time, check that the Drain Valve is
closed and open the Water Supply Line Shut-off Valve.
1) Follow the “V. 2. SHUT DOWN” and shut down the unit.
2) Close the Water Supply Line Shut-off Valve.
3) Drain salt water from the Salt Water Tank and rinse the inside the Salt Water Tank to
remove salt completely with tap water.
4) Fill the Salt Water Tank with tap water and connect the Salt Water Hose.
5) Follow the “IV. 3. PURGING SALT WATER SUPPLY PUMP” to wash the salt water circuit
with tap water. Keep the water running for at least 3 minutes.
6) Disconnect the Salt Water Hose from the Salt Water Tank and drain the hose. Wipe out
the Salt Water Hose and Salt Water Filter with a clean cloth.
7) Drain the water from the Salt Water Tank.
8) Turn the power switch off and close the Door.
9) Open the Drain Valve on the back of the unit or remove the Drain Cap to drain the remaining
water.
10) Open the Water Supply Line Drain Valve.