Mini Lady Hi-Carb Chiller
240V / 50Hz
lancerbeverage.com
Page 7 of 11
Hoshizaki Lancer reserve the right to change specifications without notice
No 005 – 26 October 2010
8. Transportation
8.1 Packaging
All the machine’s metal parts are covered in a protective film and the entire machine is enclosed in a
propylene bag.
It is contained in a cardboard box and held tightly by means of ecological foam cushions to protect it
from possible accidental crashes.
Printed on the outside of the box are the words “FRAGILE”, “ALTO” (THIS WAY UP), as well as the
trade name of the Manufacturing Company VIN SERVICE srl.
8.2 Transport and handling with packaging
The machine must always be handled in a vertical position (ref. “ALTO” – THIS WAY UP) using
forklifts and observing both the “ALTO” (THIS WAY UP) and “FRAGILE” warnings.
8.3 Storage of the machine with packaging
The machine must be stored in a humidity-free room and the machine must not be exposed to bad
weather. Never stack more than two machines on top of another.
8.4 Receiving
Each unit is completely tested under operating conditions and thoroughly inspected before shipment.
At time of shipment, the carrier accepts the unit and any claim for damage(s) must be made with the
carrier. Upon receiving units from the delivering carrier, carefully inspect shipping crate for visible
indication(s) of damage. If damage exists, have carrier note damage on bill of landing and file a
claim with the carrier.
8.5 Unpacking
Open the cardboard box, remove the ecological foam cushions and extract the machine. Remove
the propylene bag and the protective film from the machine body. Inspect unit for concealed damage
and if evident, notify delivering carrier and file a claim against the carrier.
8.6 Transport and handling the machine without packaging
The machine must always be handled in a vertical position using forklifts or by manually lifting the
machine.
