44
7) While pulling up the bin control lead, hook the bin control on the right side interior wall.
Then push the bin control up against the bottom of the unit, and slide to the back until it
snaps in place. Make sure the slotted holes at the right side of the bin control are securely
placed on the collars at the bottom of the unit.
CAUTION
Make sure the bin control is securely in place. Otherwise, ice may get between
gaps and damage the bin control.
8) Pull up any slack in the bin control lead, then put the bushing attached to the bin control
lead back into the hole in the base.
9) Connect the bin control connector to the side of the control box.
10) Replace the water tank, cube guide, pump motor bracket, pump motor and float switch
in their correct positions until they snap in place.
CAUTION
Be sure to let the discharge hose pass behind the copper tube and connect it
securely in position. Otherwise, the discharge hose may be caught in the front
insulation, leading to improper results.
