5
5. ADJUSTMENT OF MICRO SWITCH
Actuator Motor Arm
To adjust the Micro Switch (A):
1) Close the Water Pan.
2) Push up the lever until the Micro Switch (A) trips with a click sound. Then, push the
lever 1 mm further up to lock in position. Do not bend the actuator by pushing up the
lever too much.
3) After adjustment, check for proper operation.
To adjust the Micro Switch (B):
1) Push the loosely fit Switch Bracket fully to the left.
2) Turn the Actuator Motor Arm to position the roller of the Micro Switch (B) as shown
above.
3) Push the Switch Bracket fully to the right until the Micro Switch (B) trips with a click
sound. Then, lock the Switch Bracket in that position.
4) After adjustment, check for proper operation.
