17
16. SELF-CLEANING
The self-cleaning function is to rinse the wash compartment with hot water. Use this
function after step 4) of “15. DAILY MAINTENANCE”.
NOTICE
If a portion control detergent feeder other than concentration sensitive type is
used, turn off the power to the detergent feeder. Otherwise the detergent may
be supplied during the self-cleaning cycle. After the cycle completes, turn the
detergent feeder back on. If this is not practical, consult with an authorized
Hoshizaki service company.
1) Open the water supply line shut-off valve and turn on the main power supply.
2) Pull out the drain pipe.
3) Install the upper and lower rinse spray arms only.
4) With the door open, press and hold the “STANDBY/
CLEANING”
button for 3 seconds. “SC” appears in
the display.
5) Close the door. “SC” and the “AUTO FILL” lamp
start flashing, and the self-cleaning cycle begins.
The buzzer sounds and the operation panel turns
off when the cycle ends. Turn off the main power
supply and close the water supply line shut-off
valve.
6) Open the door, an
d remove the upper and lower rinse spray arms. Go on to step 5) of “15.
DAILY MAINTENANCE”.
Rack Support Frame
11) Replace the rack support frame in its correct position.
Upper Rinse
Spray Arm
Lower Rinse
Spray Arm