7
1) Check that the strainer, filter and drain pipe
are in place.
IMPORTANT
Make sure that the drain pipe is securely
inserted in the drain outlet.
2) Open the water supply line shut-off valve.
3) Turn on the main power supply.
4) Press the “ON/OFF” button. The display lights up. (If the door is closed, the auto fill
cycle begins.)
[a] AUTO FILL
The auto fill cycle refers to automatically repeated starts and stops of the unit to fill the
wash tank with enough hot water for washing. The unit starts and stops about 12 times.
Then, the dishwasher is ready for washing. The auto fill cycle starts when the water
temperature in the internal booster tank reaches 60°C.
1) Close the door. The “AUTO FILL” lamp flashes, and the auto fill cycle starts.
2) After the auto fill cycle completes, the unit stops, the “READY” lamp lights up (“AUTO
FILL” lamp goes off), and the buzzer sounds.
IMPORTANT
If the dishwasher has been drained
out to prevent freezing, close the
drain valve before opening the water
supply line shut-off valve. With the
drain valve left open, hot water will be
wasted.
Water Supply Line
Shut-off Valve
Water
Water Supply Valve
Drain Valve
Dishwasher
Strainer
Drain Pipe
Filter