13
7) Pull out the drain pipe to drain water from the wash
tank.
WARNING
When pulling out the drain pipe, be careful not to touch the wash water. It may
cause burns or skin irritation. Turn the drain pipe if it is hard to pull out.
IMPORTANT
For the drain pump model, when the power supply (display) is on, press and
hold the “ON/OFF” button for 3 seconds after pulling out the drain pipe. The
drain pump starts to fully drain the wash tank. The display shows as follows
during the full drain flush cycle. The operation panel goes off at the end of the
cycle. Then, turn off the main power supply.
8) Remove the filter.
Drain Pipe
Filter
10. INTERRUPTION
WARNING
To prevent hot water from splashing and causing burns, do not open the door
while the unit is running. Wait until the buzzer sounds 1 second after the unit
stops.