10
1. Always move the unit in an upright position. Do not set it on its side
or upside down as you may damage the cabinet and cause the oil to
migrate from the compressor.
2. If lifting the unit, hold it from its base. It is recommended to use a dolly.
3. Do not let the unit fall abruptly.
4. Appliance is heavy. Use care when lifting or positioning. Work in pairs
when needed to prevent injury or damage.
5. Do not lift using the doors.
LOCATION
Select location
This appliance is approved for indoor or outdoor use. The proper
location will ensure peak performance of your appliance. We
recommend a location where the unit will be out of direct sunlight
and away from heat sources. To ensure your product performs to
specifications, the recommended installation location temperature
range is from 55°F to 115°F (13°C to 46°C).
Cabinet clearance
Ventilation is required from the bottom front of the appliance. Keep
this area open and clear of any obstructions. Adjacent cabinets and
counter top can be installed around the appliance as long as the
front grille remains unobstructed.
Front Grille
Do not obstruct the front grille. The openings within the front grille
allow air to flow through the condenser heat exchanger. Restrictions
to this air flow will result in increased energy usage and loss of
cooling capacity. For this reason it is important this area not be
obstructed and the grille openings kept clean. It is not recommend
the use of a custom made grille as air flow may be restricted.
HANDLING THE CABINET