ENGLISH
9
WARNING
Do not wet this product or use it in
potentially wet conditions. This may
cause electric leakage, resulting in
electric shock or fire.
IMPORTANT
1. This is a commercial refrigerator/freezer,
and should be destined only to be used
for the purpose for which it has been
expressly designed. Any other use should
be considered improper and therefore
dangerous. The manufacturer will not be held
liable or responsible for any damage caused
by improper, incorrect and unreasonable use.
2. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Young children should be supervised
to ensure that they do not play with the
appliance.
I. INSTALLATION INSTRUCTIONS
1. CONSTRUCTION
Note: 1. Attach the four legs provided to the
mounting holes located at the bottom of the
unit.
2. For RTC/FTC-90M*A, attach the five legs
provided to the mounting holes located at
the bottom of the unit.
2. ACCESSORIES
Width
900mm 1200/1500mm 1800mm
a) Shelf:
2 [2]
4 [4]
6 [6]
b) Shelf clip:
8 [8]
16 [16]
24 [24]
c) Shelf holder: 5 [0]
10 [0]
15 [0]
d) Leg:
5 [5]
4 [4]
4 [4]
Note: 1. Numbers in parentheses are for models
without shelf holders.
2. Customized products may have different
numbers and specifications of accessories.
3. LOCATION
IMPORTANT
This refrigerator/freezer is not intended for
outdoor use. Normal operating ambient
temperature should be within 5°C to 38°C.
For best operating results:
* The refrigerator/freezer should not be located
next to ovens, grills or other high heat producing
equipment.
* The location should provide a firm foundation for
the equipment.
* Avoid a site where dripping is not allowed.
Especially, a side-by-side or back-to-back
installation (possibly with other manufacturer’s unit)
may cause condensation between the two units,
resulting in dripping onto the floor.
* Do not expose the unit to direct sunlight or higher
temperatures.
* Allow at least 50 cm clearance between the
front panel air inlet/outlet and the wall or other
equipment for proper air circulation. The front of
the unit should have enough space for smooth
adjustment of the cabinet temperature. If the
ambient temperature can exceed 38°C, allow at
least 10 cm clearance from the wall at the side of
the machine compartment to prevent overloading
and damaging the refrigeration circuit.
Keep Dry
Front Panel
Front Panel
Air Outlet
Door (L)
Door (R)
Top Panel
Front Panel
Air Inlet
Power Cord
Nameplate
Leg
Shelf
Window Panel
Fig. 2
Machine Compartment
Fig. 1
