background image

S4E Polaris V3 Superchiller

 

240V / 50Hz 

 

 

 

www.lancerbeverage.com 

Page 18 of 19 

Hoshizaki Lancer reserve the right to change specifications without notice. 

Part No: 68000206  

Images are for illustration purposes only as product may vary. 

No 046-3   

   7 August 2019 

11.

 

Certificate of Warranty 

It is the policy of Hoshizaki to provide to its current customers, warranty for all equipment supplied and 

installation work performed within a specified period. 

 

Parts and Equipment 

Lancer provides a warranty period of twelve (12) months from the date of original invoice for all 

manufactured parts. Repair or replace of defective parts will be at the sole discretion of Lancer.  

 

Changeover parts will be invoiced to the customer at the customers normal purchase cost and upon return 

of the warranty item and validation of the claim, the invoice will be credited. 

 

Installations 

Lancer provides a warranty period of twelve (12) months from the date of final invoice for workmanship after 

the completion of any installation work, provided the parts and labour are completed by Lancer or its 

subcontractor. 

 

Labour 

Lancer will not normally cover any labour costs associated with a warranty claim. Subject to the approval of 

the Divisional Sales Manager, Lancer may choose to reimburse the customer for some or all labour costs 

associated with a warranty claim. Any claim for labour costs must be authorized by Lancer prior to the work 

being undertaken. 

 

Exclusions 

Lancer will not accept any liability or cost associated with any consequential losses (such as loss of syrup or 

beer), loss of profit or damage to property as a result of faulty product. 

 

Warranty shall not apply: 

a) 

If in the opinion of Lancer, the equipment has been used in a situation the equipment has not been 

designed for; 

b) 

If in the opinion of Lancer, the equipment has been subject to abuse, negligence or accident; 

c) 

If connected to improper, inadequate or faulty power, water or drainage service or operated using 

incorrect, insufficient or contaminated lubricants, coolants, refrigerants or additives; 

d) 

Where the product is installed, maintained or operated otherwise than in accordance with the 

instructions supplied by Lancer; 

e) 

Where the product has been damaged by foreign objects; 

f) 

Where the product has been serviced, repaired, altered or moved otherwise than by Lancer or its 

nominees or using other than Lancer approved replacement parts. 

 

 

Содержание 31000231




















Отзывы: