Connections
Use twin and earth cable with a minimum conductor size of 2.5mm
2
to connect the
Electrisaver to the supply. Use a suitably rated three-core flexible cord (see below) to
connect the Electrisaver to the appliance to be switched.
For appliances up to 2kW rating use minimum 1.0mm
2
conductors.
For appliances up to 3kW rating use minimum 1.5mm
2
conductors.
Heat resistant flexible cord must be used if connecting the Electrisaver to an immersion
heater.
Connections to the Electrisaver terminal block should be as follows:-
N in = Neutral in
N out = Neutral out to appliance
L in = Live in
L out = Live out to appliance
3
APPLIANCE
SUPPLY
APPLIANCE
SUPPLY
N
N
in
in
out
out
N
L
L
L
LIVE
NEUTRAL
{
