horsch Pronto 10 NT, Руководство по эксплуатации

Страница: 32 / 36

Maintenance schedule
Maintenance overview Pronto 10 NT / 12 NT
daily weekly yearly
Retighten all screw and plug-in
connections as well as the hydraulic
connections
Due to material settlements or e.g. paint residues between
screw connections even properly tightened screw
connections can become loose, resulting in loose screw
connections and leaking hydraulic connections.
Retighten the wheels - all
M 18 x 1,5 - 300 Nm
M 22 x 1,5 - 510 Nm
¾
initially after 10 hours or 50 km
¾
then again after 10 hours or 50 km
¾
then retighten every day, until the screws have settled and
further tightening is no longer possible
¾
then always before the start of the season and every 50
operating hours.
In operation
Lubrication points
Bolt hitching lubricate (2) x
Bolt wing mounting lubricate (4) x
Wheel hubs, rear support wheels lubricate (2) x
Hinge bearings rear wheels lubricate (4) x
Bout marker bearings lubricate (6) x
Disc bout marker lubricate (2) x
Spindle coulter pressure adjustment lubricate (6) x
Hydraulic system
Hydraulic system and components Check for leaks, kinks in hoses, chafing and operation x
Wing pre-tension Check setting - max. 70 bar x
Pneumatic system
Distributor, seed and fertliser hoses Check for leaks, kinks in hoses, chafing and blockage x
Motorized valves tramline control Check switching function x
Cultivation tools
Coulters and pressure rollers Check for condition, tight fit and wear. Check pretension on
coulter discs. Tighten the coulter discs with 130 - 150 Nm,
press rollers with 400 Nm
x
Scrapers on coulters and press rolls Check condition, setting and state of wear x
Fertilizer coulter
Check for condition, tight fit and wear. Reset Fertilizer
tubes if required
x
Cultivation tools Check for condition, tight fit and wear.
Check light movement and leak tightness of friction ring
bearings
x
Rubber mounts for cultivation tools,
seed and Fertilizer coulters
Check condition, tension and damping x
Harrow tines Check condition and state of wear x
Adjusting screw Check for condition and smooth running x
Bout marker
Bout marker Check for condition, tight seat, function, smooth running x
Discs bout markers Check condition, bearings and fastening x
Wheels
Support wheels front and rear Check condition, fastening and air pressure (4,0 bar)
Retighten the wheels (see above)
x
25