Depth setting
It is highly recommended to find the correct set
-
ting by trying and testing.
¾
Turn the coulter pressure adjustment back to
a low pressure.
¾
Insert the same quantity and colour combi-
nation of aluminium clips on the hydraulic
cylinders.
¾
Retract the cylinders until they contact the
aluminium clips. Thereafter, switch the control
unit to the float position.
¾
Check the coulter seed depth and the con-
solidation by the press wheels.
¾
If necessary increase the coulter pressure and
check for changes after driving a few meters
in the field.
If the desired adjustment cannot be found within
the coulter pressure adjustment range, the proc-
ess must be repeated using the next lower set-
ting on the hydraulic cylinder, until the correct
setting is found.
Set all adjustment possibilities on the
machine equally.
Ballasting the tail end
Ballasting the tail end prevents the frame from
being unloaded or even lifted out in case of high
coulter pressure.
Ballasting the tail end
In case of soft soils this additional ballasting is
not necessary and, in case of too deep tracks,
the weights can be removed.
24
