horsch Pronto 10 NT Скачать руководство пользователя страница 11

Introduction

Foreword

Before operating the machine, read and strictly 

comply with the operating instructions. In doing 

so, you will avoid accidents, reduce repair costs 

and downtime and increase the reliability and 

service life of your machine. Pay attention to 

the safety instructions! 

HORSCH will not assume liability for any dam-

age or malfunctions resulting from failure to 

comply with the operating instructions.

These operating instructions will assist you in 

getting to know your machine and in using it 

correctly for its intended purposes. 

The operating instructions must be read and 

strictly adhered to by all persons working on or 

with the machine e.g.:

 

¾

Operation (including preparation, fault rectifi

-

cation during work and servicing)

 

¾

Maintenance (maintenance and inspection)

 

¾

Transport

Together with the operating instructions, you 

also receive receipt. Field service technicians 

will instruct you in the operation and care of 

your machine. After this you should return the 

machine registration form to HORSCH. This 

confirms your formal acceptance receipt of the 

machine. The warranty period starts with the 

date of delivery.

We reserve the right to alter illustrations as well 

as technical data and weights contained in these 

operating instructions for the purpose of improv-

ing the machine.

Warranty claims

Warranty claim forms must be submitted through 

your local HORSCH dealer to the HORSCH 

Service Department in Schwandorf. 

Only claims, which have been correctly com-

pleted and submitted no later than four weeks 

after the defect occurred, can be processed.

Please return damaged components cleaned 

and emptied to HORSCH within 4 weeks to-

gether with a warranty claim form and precise 

fault description.

Parts deliveries without request to return old 

parts: Please keep such parts for 12 weeks, 

until a decision has been made on the action 

to be taken.

Warranty repairs, which are to be carried out by 

a third-party company, or which are expected 

to take longer than 10 working hours, must be 

agreed upon in advance with the Customer 

Service Department.

4

Содержание Pronto 10 NT





































Отзывы: