Folding
WARNING
Dropping / lowering machine parts can cause
severe crushing injuries etc.!
¾
Instruct persons to leave the danger zone.
¾
Comply with the accident prevention instruc-
tions.
WARNING
Risk of injury on the hydraulic cylinders!
Limbs may be pinched by unintentional retrac-
tion of the piston rods.
¾
Lock control units mechanically or electrically,
depending on the version.
¾
Make sure when placing or removing clips that
the control units are not operated by any other
person.
CAUTION
Damages to the machine and on the ground.
¾
Fold the machine only on a level and firm
surface.
Unfolding
¾
Extend undercarriage and drawbar and
lift the machine completely.
¾
Remove the aluminium clips from the hydrau-
lic cylinders of undercarriage and drawbar.
¾
Unfold the machine and pre-load with
70 to 90 bar.
Folding
¾
Extend undercarriage and drawbar and
lift the machine completely.
¾
Folding the machine.
¾
Joker 5 / 6 RT: Place aluminium clips on the
piston rods of the hydraulic cylinders of un-
dercarriage and drawbar.
Place as many clips to create a distance of at
least 20 cm between ground and lower edge
of all discs after lowering.
¾
Joker 8 RT: Place aluminium clips on the
piston rods of the hydraulic cylinders of un-
dercarriage and drawbar.
Place as many clips to create a distance of at
least 7.5 cm between ground and lower edge
of all discs after lowering.
¾
Lower undercarriage and drawbar to
the aluminium clips.
32
