Position
Control unit
Floating position
Locked position
Supply
Folding
Lift/lower - undercarriage
Tools
Tractor link arm
Position of control units during transport travel
¾
Check to make sure the machine is secured
with wheel chocks and if not, please secure
the machine accordingly.
¾
Connect the hydraulic lines for
Lift/Lower
.
¾
Adjust the height of the drawbar to the tractor.
¾
Connect the machine to the adjustable draw-
bar or tractor link arms of the tractor.
¾
When using tractor link arm hitching lock the
tractor link arms against sideways movement.
¾
Connect hydraulic lines, brake lines and
lighting.
¾
Fold the support up.
For this purpose remove the bolt, fold up the
support and secure at the bottom with the bolt.
Secure the bolt with a clip pin.
Support folded
¾
Folding the machine, see
Folding
. Observe the
permissible transport heights (Joker 8 RT)
and ensure ground clearance!
¾
Remove the wheel chocks and put them in
the bracket provided (securing).
WARNING
Danger of road accidents caused by losing the
machine or machine parts.
¾
Check all interlocks before starting to drive.
¾
Check whether all securing elements of the
connection are in place as set correctly.
¾
Check components of the connection for wear.
¾
Lock the control units mechanically or electri-
cally, depending on the version, during trans-
port travel. Never switch them to the floating
position.
¾
Joker 8 RT: Check and maintain the transport
height.
NOTE
¾
Make sure before driving on public roads that
the machine meets all respective applicable
road traffic regulations.
30
