Hornet 725T Скачать руководство пользователя страница 29

Страница: 29 / 33

Valet/Program switch. If this is not the desired setting, continue to hold the Valet/Program switch and press the

arm/disarm button on the transmitter again. The siren will chirp once indicating that active arming has been

programmed. Once the desired setting has been selected, release the Valet/Program switch.

You can advance from feature to feature by pressing and releasing the Valet/Program switch the number of times

necessary to advance from the feature you just programmed to the feature you wish to access. If you just pro-

grammed Feature 2 (Arm/Disarm Chirps) to off and you next want to program Feature 4 (Passive Locks), release

the Valet/Program switch, press and release it twice to advance from Feature 2 to Feature 4. Then press it once

more and hold it. The unit will chirp four times to confirm that you have accessed Feature 4.

To exit the learn routine, do one of the following:

1. Close the open door.

2. Turn the ignition on.

3. No activity for longer than 15 seconds.

4. Press

the

Valet

/Program switch too many times.

The siren will emit a long chirp when the Learn Routine has been exited.

feature menu

Features in bold text have been programmed to the two chirp setting at the factory.

FEATURE NUMBER

ONE-CHIRP SETTING (DEFAULT)

TWO-CHIRP SETTING

Active arming

Passive arming

Arm/disarm chirps on

Arm/disarm chirps off

Ignition-controlled door locks

Standard door locks

Active locking only

Passive locking

Panic with ignition on

No panic with ignition on

0.8 second door lock pulses

3.5 second door lock pulses

Forced passive arming on

Forced passive arming off

Automatic engine disable on

Automatic engine disable off

Double pulse unlock off

Double pulse unlock on

Code Hopping on

Code Hopping off

Siren

Horn honk

Содержание 725T


































Результаты поиска

Содержание 725T

Отзывы:

Бренды по названию

Популярные бренды

Hornet 725T, Руководство по установке

Результаты поиска

Содержание 725T

Отзывы:

Бренды по названию

Популярные бренды