22
© 2003 Directed Electronics, Inc. Vista, CA
4.
Program the feature:
While
HOLDING
the Valet/program switch, you can toggle the feature
on and off using the remote transmitter. Pressing the button that locks the door will select
the one-chirp (default) setting. Pressing the unlock button will select the two-chirp setting.
NOTE:
Feature 9 (Valet pulse count) has five possible settings. Pressing the unlock
button will toggle through all the possible settings.
5.
Release the Valet/program switch.
ONCE THE FEATURE IS PROGRAMMED
■
Other features can be programmed.
■
The Learn Routine can be exited if programming is complete.
TO ACCESS ANOTHER FEATURE
After you have programmed a feature in Step 4 of the learn routine, press and release the Valet/program switch
the number of times necessary to advance from the feature you just programmed to the next one you want to
program. Then press the Valet/program switch once more and
HOLD
it. For example, if you just programmed the
third feature and you would like to program the seventh feature in the menu, you would: Press and release the
Valet/program switch four times. Then press it once more and
HOLD
it. The siren would chirp seven times to
confirm access to the seventh feature.
DEFAULT ONE-CHIRP SETTINGS
TWO-CHIRP SETTINGS
FEATURE
(PRESS TRANSMITTER LOCK BUTTON
(PRESS TRANSMITTER UNLOCK BUTTON
NUMBER
OR DOOR LOCK SWITCH)
OR DOOR UNLOCK SWITCH)
1
Active Arming
Passive Arming
2
Confirmation Chirps ON
Confirmation Chirps OFF
3
Siren duration 30 seconds
Siren duration 60 seconds
4
Instant door trigger
delayed door trigger
5
Door trigger error chirp ON
Door trigger error chirp OFF
6
Sensor shunt Zones 2 and 4
Sensor shunt all zones
7
Panic Mode enabled
Auxiliary output enabled
8
No function
9
Valet switch input 1 pulse
Valet switch input 2-5 pulses
NOTE:
Factory defaults are indicated in
bold
type.
