HORNER XL7 OCS, Руководство пользователя

Страница: 125 / 185

MAN0974-09-EN_XL7_UserManual
March 4
th
, 2019 Page 125 | 185
Table 14.3 – %SR Registers
Register Name Description Min Val Max Val
%SR213 (R) UTC – Minutes
%SR214 (R) UTC – Hours
%SR215 (R) UTC – Date
%SR216 (R) UTC – Month
%SR217 (R) UTC – Year
%SR218 Number of Webpages, license detail.
%SR219 Number of Data Points, license detail.
%SR220-
222 Expiration Date of WebMI License, license
detail.
For additional information on system bits and registers, refer to the on-line help found in
Cscape.
14.3 Register Map for XL7 OCS I/O
Table 14.4 – I/O Register Map
Registers
Description
XL7 with
no I/O
XL7 with
102 I/O
XL7 with
103 I/O
XL7 with
104 I/O
XL7 with
105 I/O
XL7 with
106 I/O
%I1-%I12 Unused Digital Inputs
%I13-%I16 Unused Reserved Digital Inputs Reserved
%I17-%I24 Unused Reserved Digital Inputs Reserved
%I25-%I29 Unused Reserved
%I30-%I31 Unused PWM Table (Below)
%I32 Unused ESCP Alarm*
%Q1 Unused PWM Table (Below)
%Q1-%Q6 Unused Digital Outputs
%Q7-%Q12 Unused Reserved Digital Outputs
%Q13-%Q16 Unused Reserved
Digital
Outputs Reserved
%Q17-%Q20 Unused HSC Table (Below)
%Q21-%Q24 Unused Reserved
%AI1-%AI2 Unused HSC Table (Below)
%AI33 - %AI38 Unused Analog Inputs
%AQ1-%AQ8 Unused PWM Table (Below)
%AQ9-%AQ10 Unused Analog Outputs
Unused = These registers can be used as general purpose registers
*Electronic Short Circuit Protection [ESCP]
NOTE: The ESCP bit is set high when the output current is too high, and the output driver has
shut down for thermal protection. This typically happens when outputs are shorted, or they
are driving loads that are higher than the output rating.