Page 5
PANEL MOUNTING
1. Cut the host panel as described in the drawing above.
2. From the front, insert the TFT through the panel cutout.
3. Align the 8 mounting screws of the display with (8) 0.1875” diameter cutouts on the panel.
4. Use (8) #6-32 thread nuts to secure the TFT into the panel cutout.
5. Tighten #6-32 thread nuts to form a tight seal. Begin by tightening the top and bottom nuts, then
the sides, and then the corners. Do not over tighten.
6. Connect the communication and power cables to the appropriate connectors.
CUTOUT DIMENSIONS
Mounting Instructions
