163
NOTE
The remote control unit only works when its sensor is aimed directly at the bathroom fan
heater.
The appliance must be in standby mode
(Check the display)
• Press the ON/OFF button
to switch the appliance on. The display
appears as in Fig. A.
• Now press the remote control function button
once to heat at half power.
The display appears as in Fig. B.
• Press a second time and the appliance heats at full power. The display appears
as in Fig. C.
• Press a third time and the appliance returns to Standby mode (see Fig. A.).
• The timer button
on the remote control functions in exactly the same way
as that on the appliance.
Setting the day and time:
• Press the SET button
once: the display shows ‘12’.
Now use the plus and minus buttons
/
to set the hour of the current
time (0-23).
Press SET again to display the minutes. The display shows ‘30’ and you can use
the plus and minus buttons to set the minutes of the current time (0-59).
Now press SET again. The display shows ‘d7’ (
); you can now use the plus and minus buttons
to set the day of the week as follows: Monday = d1, Tuesday = d2, etc.
Finally, press
to confirm your settings. The display now resorts to what it was indicating
before you made the settings.
To check the day and time, press SET.
