background image

780306A   

19HMC0088  |  06/2022

WARRANTY

All Hornady

®

 reloading tools and accessories are warranted against material defects and 

workmanship 

This warranty is void if the product (1) has been damaged by accident or unreasonable 
use, neglect, improper service or other causes not arising out of defects in material or 
workmanship; or (2) has been altered or repairs have been made or attempted by other 
than authorized factory personnel; (3) is used commercially; or (4) has been altered or 
defaced in any way.

This warranty supersedes all other warranties for Hornady

®

 products either written or 

oral. No other warranty is expressed or implied. 

PRODUCT REGISTRATION AND SERVICE

You must register your product

 

 to obtain Warranty Service. 

Complete the registration form at 

hornady.com/warranties.

 

TO RECEIVE WARRANTY SERVICE

To report a warranty claim, call Hornady

®

 at 800-338-3220 to 

request a return authorization number. Returns will not be 
accepted without prior return authorization by Hornady.

®

 

POST-WARRANTY SERVICE INFORMATION

For issues concerning service after the Limited Warranty 
expires, contact Hornady

®

 at 800-338-3220.

Scan to register your 

product to receive the full 

benefit of its warranty.

PRODUCT SERIAL NUMBER AND 

REFERENCE INFORMATION

You must register your product in order to obtain warranty service. In the event you 
should need service for your product, please note the following information: 

Serial Number ___________________________________________________________

Date Purchased __________________________________________________________

Retailer ________________________________________________________________

Hornady Manufacturing Company

P.O. Box 1848, Grand Island, NE  68802-1848  

hornady.com/contact

Содержание LOCK-N-LOAD

















Отзывы: