LOCK-N-LOAD
POWDER MEASURE
To Disassemble for Cleaning:
• Set the Rotor with the Metering Unit
perpendicular to the axis of the Body,
press the Push Button and hold it down
while removing the Metering Unit (Fig. 1).
NOTE:
Do NOT remove push button.
It is permanently installed and does not
need cleaning.
• Remove the Handle, or Rotating Arm
from the Powder Measure, by removing
the two attaching screws with a 1/8" hex
wrench. Unscrew the drop tube (Fig. 2).
• Slide the Rotor out of the Body by
pressing gently on the handle side
of the Rotor (Fig. 3).
Be careful not to drop or otherwise
damage the Rotor while it is out
of the Body.
• Remove the Lock Nut, O-Ring and Sleeve
from the Metering Plunger. Spray all
metal parts liberally with Hornady One
Shot Gun Cleaner and Lube. Be sure all
rust preventatives are removed (Fig. 4).
• Allow it to dry thoroughly before
reassembling.
Removing
Metering Unit
Drop Tube
Rotor Body
Fig. 3
Fig. 4
Fig. 2
Fig. 1
Lock Nut
O-Ring
7
