Horizon Reverse Osmosis Seafari Versatile Series, Руководство пользователя

Страница: 176 / 209

Seafari Versatile 450 - 1800
Page 11-1
11
11 ELECTRICAL INFORMATION
11.1 ELECTRICAL REQUIREMENTS
The Electric Motors within the Horizon Seafari
systems start in series with time delay between each
motor starting. First, the Booster Pump starts, then
the main High Pressure Pump Electric Motor starts.
For a normal Marine Ship installation, the current
surges with the Booster Pump starting, then drop
down to Booster Pump Electric Motor running
Amperes. At the instant of the High Pressure Pump
starting, the current surges up again then drop down
to normal system running amperage.
Therefore, the Maximum surge current equals the
Booster Pump Running Amperage plus the High
Pressure Pump Starting Amperage. The normal
running Amperage equals both the Booster Pump
Motor and High pressure Pump Motor combined
running Amperage.
VOLTAGE HZ (AC) MIN VOLTAGE MAX VOLTAGE MIN HZ MAX HZ
AC Systems - Single Phase
120 VAC
60 HZ 108 VAC 132 VAC 58 HZ 62 HZ
230 VAC 60 HZ 207 VAC 253 VAC 58 HZ 62 HZ
220 VAC 50 HZ 198 VAC 242 VAC 48 HZ 52 HZ
AC Systems - Three Phase
208 VAC
60 HZ 187 VAC 228 VAC 58 HZ 62 HZ
230 VAC 60 HZ 207 VAC 253 VAC 58 HZ 62 HZ
460 VAC 60 HZ 414 VAC 506 VAC 58 HZ 52 HZ
220 VAC 50 HZ 198 VAC 242 VAC 48 HZ 52 HZ
380 VAC 50 HZ 342 VAC 418 VAC 48 HZ 52 HZ
11.1.2 AC INDUCTION MOTORS
After unpacking, check for damage. Be sure that the
shaft rotates freely.
Check line voltage, frequency and phase, ensure that
it agrees with system nameplate. Grounding and
circuit protection should be done in accordance with
National Electrical Code. See connection diagram
on nameplate of motor or refer to the diagrams on
pages 11-4 through 11-9.
11.1.1 POWER SOURCE REQUIREMENTS
HP Pump Motor
Fan section (back view)
Booster Pump Motor
fan section (back view)