7
EN
Control Direction Test
You should bind your aircraft and transmitter before doing these tests.
Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and in the
proper direction. Make sure the tail linkages move freely and that paint or decals are not adhered to them.
Down
Elevator
Right
Rudder
Left
Rudder
Up
Elevator
Center of Gravity (CG) Adjustment
The CG location is
36mm
back from the leading
edge at the wing root.
This CG location has been determined with the
recommended 1S 150mAh 3.7 Li-Po battery
installed in the battery cavity located on the bottom
of the aircraft.
Balance the model on edge of a metal ruler to
fi nd the Center of Gravity. Place the ruler on the
underside of the airframe at the CG location shown
in the image to the right. Move the battery forward
or aft until the model closely balances at
this location.
36mm
