8
INSTALLATION AND REMOVAL OF THE LIPO BATTERY
CAUTION:
Keep hands clear of propeller during battery installation and removal.
1
2
3
Use two fingers to secure
connector during battery
installation and removal.
Connect the LiPo
to the lead.
The battery is
held in place
magnetically.
Align the red dots to
ensure the polarities
of the plug and the
battery match.
Disconnect and remove the battery after use by holding the battery lead with two fingers and removing
the battery from the lead with the other hand. Do not yank or jerk the battery from the aircraft. This
could dislodge the 3-in-1 control unit from the model.
Note:
The battery features a small metal dot that
secures the battery to the magnet in the battery compartment. Without the dot the battery will not attach.
CHECK THE CONTROL SURFACE DIRECTION
Right stick moves
down, elevator moves
up causing the
aircraft’s nose to pitch
up, gaining altitude.
Right stick moves left,
rudder moves left,
causing the aircraft to
bank to the left.
