11
BINDING
The airplane comes bound to the transmitter. Should you need to re-bind, follow these steps.
1.
Turn on both transmitter and aircraft.
2. Press both throttle trim buttons simultaneously.
3.
The transmitter will beep until binding is completed automatically.
4.
Rudder and elevator will move briefl y.
5. Beeping will stop, binding complete.
Arming
When the transmitter and airplane are powered on, the aircraft binds
automatically and the tail surfaces move briefl y. After that, all functions
are active and the propeller will spin when the throttle stick is moved.
SERVO REVERSING
Complete all steps with the transmitter and aircraft powered on.
The transmitter features servo reversing on the rudder and elevator channels. The servo direction was
set correctly at the factory however, in case any of the controls are operating in the wrong direction or
you use the electronics in other models later, please follow these steps to change the servo directions
as needed. Complete all steps with the transmitter and aircraft powered on.
Rudder Channel Servo Reversing
Press and hold the right rudder trim button, then press the left rudder trim button. Release both buttons
and the servo direction will be reversed. Repeat to change back.
Elevator Channel Servo Reversing
Press and hold the right rudder trim button, then press the down elevator (top) trim button. Release
both buttons and the servo direction will be reversed. Repeat to change back.
ADJUSTMENT OF LINKAGES
To alter the center position, or increase/decrease the control throws, follow these steps. Be sure to unpower the model
before attempting to mechanically adjust the linkages.
Moving the pushrod OUTWARD
DECREASES the control throw.
Moving the pushrod INWARD
INCREASES the control throw.
Control Surface
Alter the Center
Position
Increase/Decrease Throws
Default Elevator Position
Default Rudder Position
Use caution when removing and reinstalling the pushrod in the
control horn to avoid accidentally disconnecting the linkage
from the 3-in-1 control unit.
Press
and
Hold
Throttle
Stick
Throttle
Stick
