EN
Propeller Installation
WARNING:
Disconnect the battery from the aircraft before installing the
propeller or performing any propeller maintenance. Complete all system
setups before starting the aircraft for the fi rst time.
1. Install back side of propeller hub (
A
), propeller (
B
), and front side propeller
hub (
C
) onto the motor shaft (
D
). The propeller size numbers (10.5 x 8) must
face out from the motor for correct propeller operation.
2. Install the spinner nut (
E
) to secure the propeller into place. Use a small
screw driver or hex wrench inserted into the small hole (Inset) and turn
clockwise to secure it into place.
Disassemble in reverse order.
Model Assembly
Continued
E
D
C
B
A
Drop Tank, Rocket Tubes and Bomb Installation
1. Clip the bombs
(A)
and center drop tank
(B)
to the brackets.
2 Slide the Rocket Tubes
(C)
into the rails on each wing.
Check the Center of Gravity with the drop tanks installed.
See the Adjusting the Center of Gravity instructions for more information.
Drop Tank, Rocket Tubes and Bomb Installation
1. Clip the bombs
(A)
and center drop tank
(B)
to the brackets.
2 Slide the Rocket Tubes
(C)
into the rails on each wing.
Check the Center of Gravity with the drop tanks installed.
See the Adjusting the Center of Gravity instructions for more information.
A
B
C
7
