EN
Model Assembly
Continued
Horizontal Stabilizer Installation
1. Slide the tail joiner tube into the fuselage.
2. Slide the horizontal tail halves onto the joiner tube.
3. The retainers will click when the tail parts lock into
position.
8.
4.
5.
6.
4.
5.
6.
4.
5.
6.
4.
5.
6.
4. Insert the elevator pushrod into the outside hole on the elevator control horn.
5. Slide the pushrod keeper onto the end of the pushrod.
6. Rotate the pushrod keeper onto the pushrod and snap it into position
on the pushrod.
7. Locate the horizontal stabilizer brace mounting points on the bottom of the
horizontal stabilizer and the sides of the fuselage
8. Secure the braces in position with the six 2mm x 8mm self-tapping screws.
Disassemble in reverse order.
5
