EN
Ski Installation
(Optional)
Ski Installation
1. Remove the wheels and axles from the landing gear.
2. Place the springs on the axle retainers and thread the axles included with
the skis into the axle retainers.
3. Mount the skis onto the axles and secure them in place with the 3mm nut.
4. Mount the brackets for the limit cords to the landing gear with the included
3x8mm screw.
5. Remove the tail wheel and install the tail ski as shown.
6. Loosen one of the mounting screws for the tail wheel bracket and tie the
limit cord for the tail ski from the nose of the ski to the screw.
7. Tighten the bracket screw.
Disassemble in reverse order.
17
