Horizon Fitness Syros, Руководство пользователя

Страница: 5 / 17

8 9
ASSEMBLY Step 3
SYROS
SYROS PRO
A Slide AXLE through CONSOLE MAST carefully.
B Attach the LOWER HANDLEBAR to CONSOLE
MAST using 1 PRE-INSTALLED BOLT , 1 PRE-
INSTALLED ARC WASHER , 1 PRE-INSTALLED
FLAT WASHER Φ 36 & 1 PRE-INSTALLED
WASHER
Φ
38 .
C Repeat steps
B
on the opposite side.
PRE-INSTALLED BOLT
PRE-INSTALLED ARC WASHER
PRE-INSTALLED FLAT WASHER Φ 36
PRE-INSTALLED FLAT WASHER
Φ
38
LOWER HANDLEBAR
CONSOLE MAST
AXLE
NOTE: There is no hardware for this step.
BOLT (27)
M8 x 20
Qty: 2
BOLT (30)
M10 x 78
Qty: 2
FLAT WASHER (39)
Φ 8 x Φ 21 x 2T
Qty: 2
FLAT WASHER (33)
Φ 10 x Φ 19 x 2T
Qty: 2
END CAP (41)
Qty: 2
ARC WASHER (102)
Φ 8
Qty: 2
NUT (34)
M10
Qty: 2
ASSEMBLY Step 4
HarDWare partS:
SYROS
SYROS PRO
A Slide PEDAL ARM to CRANK using 1 FLAT
WASHER (39) , 1 ARC WASHER (102) , 1 BOLT(27)
& 1 END CAP (41) .
B Align opposite end of PEDAL ARM on the bottom of
LOWER HANDLEBAR , secure the joint with 1 BOLT
(30) , 1 FLAT WASHER (33) and 1 NUT(34) .
C Attach the PEDAL ARM COVER from both side of
PEDAL ARM using 2 PRE-INSTALLED BOLTS and
2 PRE-INSTALLED SCREWS .
d Repeat steps
A-C
on the opposite side.
PEDAL ARM
PRE-INSTALLED SCREW
PRE-INSTALLED BOLT
PRE-INSTALLED BOLT
LOWER HANDLEBAR
PEDAL ARM COVER
CRANK
27
41
39 102
34
33
30