12
13
ASSEMBLY
Step 6
A Slide
UPPER HANDLEBAR
onto
LOWER
HANDLEBAR
and secure using 1
PRE-INSTALLED
BOLT
, 1
PRE-INSTALLED ARC WASHER
and 1
PRE-INSTALLED SPRING WASHER
.
B Attach the
HANDLEBAR COVERS
from front side
using 1
PRE-INSTALLED SCREW
and 1
PRE-
INSTALLED BOLT
and rear side using 1
PRE-
INSTALLED BOLT
.
C
Repeat
A-B
on the other side.
UPPER HANDLEBAR
PRE-INSTALLED BOLT
PRE-INSTALLED ARC WASHER
PRE-INSTALLED SPRING WASHER
LOWER HANDLEBAR
UPPER HANDLEBAR COVER
PRE-INSTALLED BOLT
PRE-INSTALLED SCREW
PRE-INSTALLED BOLT
SYROS
SYROS
PRO
NOTE: There is no hardware for this step.
SYROS
SYROS
PRO
T KNOB (22)
M8 x 55mm
Qty: 1
BUSHING (21)
Φ
8 x
Φ
13 x 35mm
Qty: 1
ASSEMBLY
Step 7
HarDWare partS:
A Feed the
HANDLBAR WIRES
through the hole in the
CONSOLE MAST
and out the top of the
CONSOLE
MAST
.
B Attach the
HANDLEBAR
to
CONSOLE MAST
using
1
BUSHING (21)
and 1
T KNOB (22)
.
C Connect the
CONSOLE CABLES
and carefully tuck
the
CONSOLE CABLES
into the
CONSOLE MAST
.
d Attach the
CONSOLE
to the
CONSOLE MAST
using
4
PRE-INSTALLED BOLTS
.
E Attach the
LEFT
&
RIGHT CONSOLE MAST
COVERS
to the
CONSOLE MAST
using 4
PRE-
INSTALLED BOLTS
and 1
PRE-INSTALLED
SCREW
.
F Plug in
POWER ADAPTER
.
HANDLEBAR
HANDLBAR WIRE
CONSOLE MAST COVER
CONSOLE
PRE-INSTALLED SCREW
CONSOLE MAST
PRE-INSTALLED BOLT
PRE-INSTALLED BOLT
22
21
NOTE: Be careful not to pinch any wires while
attaching the console.
