23
SEMI-RECUMBENT SERIES
C O M M O N P R O D U C T Q U E S T I O N S
ARE THE SOUNDS MY SEMI-RECUMBENT BIKE MAKES NORMAL?
Our semi-recumbent bikes are some of the quietest available because they use belt dri-
ves and friction free magnetic resistance. We use the highest grade bearings and belts to
minimize noise. However, because the resistance system itself is so quiet, you will occa-
sionally hear other slight mechanical noise. Unlike older, louder technologies, there are
no fans, friction belts, or alternator noises to mask these sounds on our semi-recumbent
bikes. These mechanical noises, which may or may not be intermittent, are normal and
are caused by the transfer of significant amounts of energy to a repidly spinning fly-
wheel. All bearings, belts and other rotating parts will generate some noise which will
transmit through the casing and frame. It is also normal for these sounds to change
slightly during a workout and over time because of thermal expansion of the parts.
WHY IS THE SEMI-RECUMBENT BIKE I HAD DELIVERED LOUDER THAN THE
ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because there is generally
more background noise than in your home. Also, there will be less reverberation on a car-
peted concrete floor than on a wood overlay floor. Sometimes a heavy rubber mat will
help reduce reverberation through the floow. If a fitness product is placed close to a wall,
there will be more reflected noise.
HOW LONG WILL THE DRIVE BELT LAST?
The computer modeling we have done indicated virtually thousands of maintenance free
hours. Belts are now commonly used in far more demanding applications such as motor-
cycle drives.
CAN I MOVE THE SEMI-RECUMBENT BIKE EASILY ONCE IT IS ASSEMBLED?
Your Horizon Fitness semi-recumbent bike has a pair of transport wheels built into the
front foot. It is easy to move your semi-recumbent bike by rolling it on the front trans-
port wheels. It is important that you place your Horizon Fitness semi-recumbent bike in
a comfortable and inviting room. Your semi-recumbent bike is designed to use minimal
floor space. Many people will place their semi-recumbent bikes facing the TV or a picture
window. If at all possible, avoid putting your semi-recumbent bike in a unfinished base-
ment. To make exercise a desirable daily activity for you, the semi-recumbent bike sould
be in a attractive setting.
PROBLEM:
Erratic or inconsistent Readout.
SOLUTION:
This is often caused by dry electrodes or a loose chest strap. Moisture on the
rubber electrodes is required for proper operation. Try a more generous coating of water
on the electrodes and tightening the chest strap.
Chest your exercise environment for sources of interference such as high power lines,
large motors, etc.
You may experience an erratic readout under the following conditions:
-Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while
holding onto the heart rate handlebars.
-Constant movement and vibration due to constantly holding the heart rate grips while
exercising.
-When you are breathing heavily during a workout.
-When you hands are constricted by wearing a ring.
-When you hands are dry or cold. Try moistening your palms or rubbing them together
to warm.
-Anyone with heavy arrhythmia.
-Anyone with arteriosclerosis or peripheral circulation disorder.
-Anyone whose skin on the measuring palms is especially thick.
Note: Outside interference sources such as computers, motors and fluorescent lights
may cause the heart rate reading to be erratic.
If the above thoubleshooting section does not remedy the problem,
discontinue use and turn the power off.
Please contact your local dealer for further assistance.
SEMI-RECUMBENT SERIES
24
Содержание Semi-recumbent
Страница 1: ......
