Horizon Fitness S-Class Series, Руководство пользователя

Страница: 26 / 34

K N O W Y O U R U P R I G H T B I K E
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The
most important maintenance step is to simply wipe your perspiration off the bike
after each use.
HOW DO I CLEAN MY HORIZON FITNESS UPRIGHT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
26
S.Class Series
Bsc 2
9
Cleanliness of your Horizon Fitness upright bike and its operating environment will
keep maintenance problems and service calls to a minimum. For this reason,
Horizon Fitness recommends that the following preventive maintenance schedule
be followed.
AFTER EACH USE (DAILY)
Turn off the upright bike with the on/off switch, and unplug the power cord from
the wall outlet.
WARNING!
To remove power from the upright bike, the power cord must be disconnected
from the wall outlet. (Bsc3 only)
• Wipe down the upright bike with a damp cloth. Never use solvents, as they can
cause damage to the upright bike.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the upright bike or in any other
area where it can become pinched or cut.
• Check the tension and alignment of the upright bike. Make sure that the upright
bike belt will not damage any other components on the bike by being misaligned.
EVERY WEEK
Clean underneath the upright bike, following these steps:
• Turn off the upright bike with the on/off switch.
• Then unplug the power cord at the wall outlet. (Bsc3 only)
• Move the upright bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the upright bike.
• Return the upright bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
R O U T I N E M A I N T E N A N C E
PEDALS
CONSOLE
CONSOLE MAST
TENSION
KNOB
FRONT
FOOT
TUBE
ADJUSTABLE SEAT
LEVER
SEAT
TRANSPORT
WHEEL
REAR SUPPORT
TUBE
SIDE COVERS
GRIP PULSE
HANDLEBARS
Bsc series owner’s guidev1.0.qxd 2/19/2003 10:51 AM Page 10