Horizon Fitness HTS-580 Series, Руководство по эксплуатации, Страница: 178 / 247

178
⒀Repeat procedure as needed.
Collimate
C
F1
⒁Press the F4 (CALC) key.
Coordinate data of the new point
will be shown.
F4
⒂Press F4 (YES) key *5
The new point data will be stored
into the coordinate data file and
the value of occupied coordinate
data will change to that of the
calculated new point.
F4
*1）See Section 1.10 “How to Enter Alphanumeric characters”
*2）When there is no need to store the new point data press F3 (SKP) key.
*3）To enter the known point coordinate data by directly press F3 (NEZ) key.
*4）RESIDUAL ERROR
dHD (Horizontal distance between two known points )= Measured Value -
Calculated Value
dZ (Z coordinate of the new point calculated from known point A) - (Z coordinate of
the new
point calculated from Point B )
*5）If the F3 (NO) key is pressed the new point data is not stored to the coordinate
data file, only the value of the occupied coordinate data changes to that of the
calculated new point.