Horizon Fitness HTS-580 Series, Руководство по эксплуатации, Страница: 117 / 247

117
1. Meauring
Operation procedure operation dispaly
①select one known point，erect
the instrument at this point(for
example :now see number 111
point as the starting point)，this
point is station point ， set the
backsight point to be NO.110
point，collimat the traverse point
（such as shown in the picture，
collimate NO.112 point），note
down the measured point by【SD】
measuring.
F2
② Move the instrument to
NO.112 point. Power on the
instrument，reset the station point
（ NO.112 ） 、 backsight
（NO.111），collimate NO.113
point，note down the measured
point by【SD】measuring.
F2
③ Measure and note the
coordinate
with the same
procedure to step ② . （ the
quantity of the traverse points
depend on the length of the
traverse
and the accucy
required）.