Horizon Fitness Evolve Plus, Руководство пользователя

Страница: 20 / 33

19
THE TREADMILL IS NOT CALCULATING MY DAILY STEP COUNT.
You need to transmit the step count from the pedometer to the treadmill at the start of each
workout. The pedometer will only transfer the step count information to the treadmill when you
send it. The button will need to be held for 2-5 seconds.
Consult the instructions located to the right of the display on your treadmill to ensure the most
precise results. Transmission can take up to 15 seconds.
THE STEPS PROGRAMS ARE NOT FUNCTIONING ON THE TREADMILL.
THERE IS A DELAY BETWEEN THE PEDOMETER AND THE TREADMILL.
The pedometer does not transmit the step count to the treadmill continuously during the
workout. Rather, it transmits the step count approximately every 20 seconds.
The pedometer must be both turned on and worn on the hip during the workout for the steps
programs to function correctly.
Stand on the treadmill, press and hold on your pedometer for approximately 5 seconds.
The treadmill will then receive your steps count from your pedometer. This transmission may take
up to 15 seconds.
Then place the pedometer on your hip according to the positioning suggestions on the pedom-
eter instruction sheet.
On the treadmill console, select a steps program and press START.