Horizon Educational Electric Mobility Experiment Set Скачать руководство пользователя

Страница: 2 / 10

Solar Powered Car

What you need :

a. Car frame
b. Photovoltaic solar panel
c. Wires
d. Solar panel support

Important notes :

1. You can set the wheels position using the steering on the front of the car

2. Ensure that the electrical connections under the car are light.

3. For the first use, remove the shrink-wrap from the solar panel.

4. The car should be run under direct strong sunlight.

Power the car with solar energy

a. You have to fit the solar panel support onto the car. Ensure they strongly meet together.

b. Place the solar panel as shown in the picture below. Remind that the plugs have to be on the right side

when you face the car.

c. Then, connect the engine wires which exceed the bottom of the car, to the closest red and black plugs.

d. After this, you have just to connect the solar panel and the car using the two remaining wires.

Ensure to respect the polarity shown by the color code.

e. Now you have just to place the car under direct strong sunbeams to make ii run .

.....

��•

..... .....

..........

Содержание Electric Mobility Experiment Set










