c. Connect the car engine wires to the plugs on the car.
d. Connect the black long wire in the central plug and the red on in the front red plug. Connect the
other end of these wires into the car right plugs. The car starts to move. Ensure that you have
connected the wires in the good sense. On the contrary, the car will go back.
Note: After long time running, the car speed will slow or stop. If you want to continue to run the car, you
should pull out the anode metal plate to clean it up with the running water. Replenish some salt solution to
the fuel cell tank. Place back the anode metal plate to the cathode fuel cell tank, the car will continue to run.
After use, you should pull out the anode metal plate and clean up the fuel cell tank with the running water.
Keep them dry for storage.
TROUBLESHOOTING
The car does not run.
Solution: 1. Make sure the connections are correctly done.
2. Try to clean the anode plate, if it still does not work polish the metal parts.
3. Change the anode plate.
4. Ensure you have replenished the salted solution into the tank.
14
Power a car using a fuel cell and a hydrogen storage
What you need:
a. Car Frame
b. Mini fuel cell
c. Wires
d. Tubes
e. Clamp
f. HYDROSTIK PRO
g. Purging valve
h. HYDROSTIK PRO pressure regulator
i. U fixator for HYDROSTIK PRO
You will also need the following items
(not included in this kit):
b
- HYDROFILL PRO for charging
the HYDROSTIK PRO
- Scissors
C
d
e
g
h
Note: The HYDROSTIK PRO contains no hydrogen when you get it for the first time, you have to fully charge the
HYDROSTIK PRO with the refilling station HYDROFILL PRO (not provided) or hydrogen charging tube (not provided).
Or please contact your local dealer for detailed information.
HYDROSTIK PRO SAFETY INFORMATION
• DO NOT try to disassemble, open or repair the cartridges when broken or worn out!
• DO NOT store cartridges under direct sunlight.
• Keep it away from fire. Fire Hazard!
• Keep in a safe place.
• Keep in a dry, cool place.
• Keep away from temperature above so·c while filling, storage and using.
• Provide adequate ventilation and refrain from placing items on or around the appliance
during operation. Refrain from placing the appliance in enclosures or causing the appliance to not vent freely.
• Keep away from alkaline and acidic environment.
• This is not toy- keep away from children.
• The cartridge must be placed horizontally when it is being charged otherwise the cartridge can crack!
• HYDROSTIK PRO contents are flammable. Do not disassemble.
• Avoid contact with HYDROSTIK PRO contents.
• Remove the HYDROSTIK PRO from the pressure regulator immediately after use.
• When using the appliance, basic safety precautions should be followed to reduce risk of fire, or personal injury.
• Hydrogen shall be stored, handled and used with caution so life and health are not jeopardized and the risk
of property damage is minimized.
• This appliance is not tested for use with medical devices.
• Save these instructions and review frequently during use.
15
