horiba LAQUAact-PD110, Инструкция по эксплуатации

Страница: 67 / 117

Data functions
51
●
Using the automatic data save
This function saves the data in the internal memory of the instrument at the specified
interval automatically.
While using this function, auto stability and hold mode are not available and the
automatic power off setting is disabled.
If the batteries run out while using the automatic data save function, the data saved until
just before the batteries run out. Replace the batteries and check the data.
1. Press the key to enter the data mode.
2. Press the keys to select "AUT LOG" (automatic data save) and then press
the key.
3. Enter the interval of saving in seconds and press the key.
An interval from 0, 2 s to 3600 s can be set.
When "0" is entered, this function is set to OFF.
key
key