manualshive.com logo in svg

horiba D-72, Инструкция по эксплуатации

Поделиться
Скачать
horiba D-72 Скачать руководство пользователя страница 7

For your safety

V

■

Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and
follow the instructions carefully.

●

Hazard classification

●

Warning symbols

This indicates an imminently hazardous situation which, if 
not avoided, will result in death or serious injury. This is to 
be limited to the most extreme situations.

This indicates a potentially hazardous situation which, if 
not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if 
not avoided, may result in minor or moderate injury. It may 
also be used to alert against unsafe practices.
Without safety alert indication of hazardous situation 
which, if not avoided, could result in property damage.

Description of what should be done, or what should be followed

Description of what should never be done, or what is prohibited

Содержание D-72

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды