CODE:GZ9100496983H
January, 2017
© 2017 HORIBA Advanced Techno Co., Ltd.
1
ISFET pH
電極 取扱説明書
ISFET pH Electrode Instruction Manual
0030-10D
お買い上げいただきありがとうございます。
ISFET pH
電極は応答部が半導体センサのため、ガラス電極に比べて割れにくく、取り
扱いが容易です。この
ISFET pH
電極は、
pH
メータ(
D-10
、
D-20
、
D-50
、
D-70
、
F-10
、
F-20
、
F-50
、
F-70
シリーズ)に接続して使
用できます。ご使用になる前にこの取扱説明書をお読みください。
本書は、日本語で作成された原文です。
Thank you for purchasing a HORIBA ISFET pH electrode. This product is less fragile and more easy to handle than existing glass elec-
trodes because of semiconductor, and can be used with pH meters (D-10, D-20, D-50, D-70, F-10, F-20, F-50, F-70 series). Read this
manual carefully before use.
This is the English translation of an original Japanese document.
■
保証と責任の範囲
/Warranty and Responsibility
保証期間内(お買い上げ日より
1
年間)に、正常な使用状態において万一故障した場合には、無償で交換または修理いたします。そ
の際はお買い上げの販売店にご連絡ください。(ただし変換器のみ、センサ部については新品不良のみ無償交換いたします。)
本保証には、事故、災害、誤用、不注意、および弊社以外の者による分解、改造により生じた損傷の修理サービスは含まれません。
製品が良好な稼動状態でない場合のお客様に対する救済手段は、弊社による製品の修理または製品の交換に限られるものとします。
弊社はいかなる場合にも、お客様の逸失利益および第三者からお客様に対してなされた賠償請求に基づく損害については責任は負わ
ないものとします。
The product (the converter excluding batteries, sensor, and accessories) shall be repaired or replaced free of charge should any mal-
function occur during the course of normal use if returned within the warranty period (12 months from date of purchase). Return the con-
verter with proof of purchase date.
This warranty does not cover damages caused by accidents, disasters, misuse, carelessness, and unauthorized disassemble and
remodeling.
The sole and exclusive remedy of HORIBA Advanced Techno Co., Ltd. under this limited warranty shall be repair or replacement of the
product within a commercially reasonable time from notification.
In any case, HORIBA Advanced Techno Co., Ltd. shall not be responsible for customer’s passive damages, or damages which may
arise from claims instituted by a third party against customers.
■
目次
/Contents
1.
使用上の注意
....................................................................................................................... 2
2.
製品の概要
........................................................................................................................... 3
3.
準備
..................................................................................................................................... 4
4.
校正の手順
........................................................................................................................... 5
5.
測定の手順
........................................................................................................................... 5
6.
保管
..................................................................................................................................... 6
7.
保守
..................................................................................................................................... 6
1.
Cautions on use ................................................................................................................. 7
2.
Specifications and Components ...................................................................................... 8
3.
Preparation ......................................................................................................................... 9
4.
Calibration .......................................................................................................................... 10
5.
Measurement ..................................................................................................................... 10
6.
Storage ............................................................................................................................... 11
7.
Maintenance ....................................................................................................................... 11