Horiba Scientific LAQUAact D-72G, Инструкция по эксплуатации

Страница: 32 / 94

Preparation
12
• Using the AC adapter (option)
It is possible to use the AC adapter to operate the instrument.
Perform the following procedure to connect AC adapter to the instrument.
The AC adapter is an option. To purchase it, contact your dealer. (Refer to “ Options ”
(page 69).)
1. Open the AC adapter cover of the
instrument.
2. Insert the AC adapter cable by fitting
with the connector socket of in the
instrument.
3. Insert AC adapter into the electrical
socket.
Note
・
Do not insert the cable with force when the connector does not match the socket.
・
When not using the AC adapter, close the AC adapter connector cover.
・ While connected to the AC adapter, the instrument does not have the dust-proof and
waterproof performance. Dust or moisture could get inside the instrument, possibly
causing instrument malfunction.
• Pressing the POWER key
After setting the batteries or connecting the AC adapter, press the key over 1 second.
The LCD is fully displayed for 1 second, and the screen displays the measurement
mode.
Note
・
Do not hold down the key after the power of the instrument is turned ON.
・
Do not use the tip of nail or an object with a sharp end to press keys.
key
1 second later