How to Change the Design
Close the frame, put the buttons, screws, and
joystick back to their original state, and close
the housing cover.
④
- Do not remove the transparent cover.
If it comes off, reattach it according to
the groove on the frame.
Open the frame and replace the design sheet.
③
Frame
Open the housing cover, place it on a
stable surface, and remove the
buttons (9) shown in the diagram
to the right.
①
As shown in the diagram below, remove the screws (8 screws) and joystick ball top.
②
h
Button,
j
Button,
k
Button,
l
Button
L1 Button,L2 Button,R1 Button,R2 Button
Option Button
How to remove the
joystick ball top
Screwdriver
(sold separately)
Plate
●
The parts are separated as
shown in the figure below.
Housing Cover
1
）
Hold the
joystick ball top
2
）
Turn the
screw
Housing Cover
Ball Top
Shaft
