Hoppecke Batteries Rail Power, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 47

Batteries_Rail_Power_Manual_en02.docx 5
7. NOTES ON STORAGE 24
7.1. Storage with permanent float charge 25
7.2. Storage with regularly recharge 25
7.3. Storage with built-in battery 26
8. ASSEMBLY / COMMISSIONING 27
9. MAINTENANCE 29
9.1. Preventive maintenance 29
9.1.1. Visual inspection of the battery 30
9.1.2. Measurement of the charging voltage 31
9.1.3. Cleaning the battery 32
9.1.4. Measuring the insulation resistance 33
9.1.5. Measuring the open-circuit voltage on each battery block/cell 35
9.2. Corrective maintenance 36
9.2.1. Exchange of rail.power blocks/cells 36
9.2.2. Exchanging a cell connector 38
9.2.3. Exchange of the temperature sensor 39
10. TROUBLESHOOTING 40
10.1. Insufficient capacity 40
10.2. Insufficient insulation resistance 40
10.3. No battery voltage can be measured 41
10.4. Malfunction of the temperature sensor 41
11. DISASSEMBLY 42
12. DISPOSAL 43
13. APPENDIX 44
13.1. Additional tools 44
13.2. Maintenance protocol 45
13.2.1. Half yearly maintenance interval 45
13.2.1.1. Maintenance - visual Inspection of the battery 45
13.2.2. Yearly maintenance interval 46
13.2.2.1. Maintenance - measurement of the charging voltage 46
13.2.2.2. Maintenance - cleaning the battery 46
13.2.2.3. Maintenance - measuring the insulation resistance 46
13.2.3. Maintenance interval 4 years 47
13.2.3.1. Maintenance - measuring the open-circuit voltage on each battery block / cell 47