START STOP
MEM
SET
START STOP
MEM
SET
START STOP
MEM
SET
START STOP
MEM
SET
START STOP
MEM
SET
START STOP
MEM
SET
MEASUREMENT
8
♥
Start the Measurement
1.
Press the “START/STOP” button to turn
on the monitor. The whole measurement
will take place automatically.
The LCD Display will power up.
The unit will adjust to zero and
calibrate automatically. (The
unit will calibrate every time it
is turned on.)
The unit will inflate and begin to
take the measurement.
Once the measurement has been
taken, the unit will deflate, display
the reading and the category of the
reading, and store the reading in the
memory.
2.
Press the “START/STOP” button to turn
the monitor off, otherwise the monitor will
power off automatically within 1 minute.
